IWETHEY v. 0.3.0 | TODO
1,095 registered users | 0 active users | 0 LpH | Statistics
Login | Create New User
IWETHEY Banner

Welcome to IWETHEY!

IWETHEY Home / IWETHEY Board / Hardware Forum / Odd
Post #74,140
by JayMehaffey
1/12/03 3:49:17 PM
Reply
New Odd
My Athlon 1800+ runs a temperature of 80-85 degrees celsius even when it's not doing anything. And that is with the case off also.

Jay
Post #74,144
by Another Scott
1/12/03 4:06:34 PM
Reply
New That's *very* hot.
Are you sure that's correct? My Athlon 1000 (Thunderbird) at work runs at 34-35 C using a Thermaltake Volcano 6Cu heatsink/fan (with some cheap white grease). My IBM 60 GB hard drive is much hotter (54 C IIRC).

[link|http://www.pcstats.com/articleview.cfm?articleid=1162&page=2|This] page measured 53-54 C for AthlonXPs with 2000+ and 2100+ ratings.

Cheers,
Scott.
Post #74,147
by cwbrenn
1/12/03 4:18:28 PM
Reply
New I'm very sure.
The mainbord is 29.0 deg. C, currently CPU1 is 49.0 deg. C, but just a minute ago it was 51. This is for the Athlon 1000.

"We are all born originals -- why is it so many of us die copies?"
- Edward Young
Post #74,148
by cwbrenn
1/12/03 4:19:45 PM
Reply
New Oh, nevermind. You were talking to Jay. :D
/me is egotist. :)
"We are all born originals -- why is it so many of us die copies?"
- Edward Young
Post #74,149
by Another Scott
1/12/03 4:20:44 PM
1/12/03 4:21:40 PM
Reply
New Nothing to see. Move along. :-)
Expand Edited by Another Scott Jan. 12, 2003, 04:21:40 PM EST
Expand All History
Post #74,160
by JayMehaffey
1/12/03 5:50:23 PM
Reply
New That is what it says
I'm using a GA-7VAXP, which comes with a utility that reads the temperature off the motherboard sensor. The CPU is running 80 right now and the motherboard reads 45.

The only thing I've got tweaked on the system is the memory settings. To get it to run stably in the fastest memory mode I had to jack up the memory power one step. This increases the voltage for the memory only from 2.5 to 2.6. I've tested it both ways and this doesn't effect the CPU at all.

Heck, even on my old 1.1 Ghz Athlon I've never seen the temp go below 70 once the system is warmed up.

Jay
Post #74,152
by folkert
Picture of folkert
1/12/03 4:31:32 PM
Reply
New AHHH... YIKES...
My Athlon 1800+ runs a temperature of 80-85 degrees celsius even when it's not doing anything. And that is with the case off also.


Wow, I have my thermal alarm set at 60 degree C. Maybe when playing UT2003 I get to 55 degree C. Or when running a couple of VMs on the same box... WHILE Overclocking it...as well...

You are sucking the life outta that THING!!!

Me, I have an XP1900+ running at ~1704 MHz all day everyday... Tweaked the Voltage up 2.5% on the CPU, RAM, PCI and AGP... all is well an good...
[link|mailto:curley95@attbi.com|greg] - Grand-Master Artist in IT
[link|http://www.iwethey.org/ed_curry/|REMEMBER ED CURRY!]   [link|http://pascal.rockford.com:8888/SSK@kQMsmc74S0Tw3KHQiRQmDem0gAIPAgM/edcurry/1//|ED'S GHOST SPEAKS!]
Heimatland Geheime Staatspolizei reminds:
These [link|http://www.whitehouse.gov/pcipb/cyberstrategy-draft.html|Civilian General Orders], please memorize them.
"Questions" will be asked at safety checkpoints.
     Having the darndest time trying to troubleshoot this problem - (cwbrenn) - (49) - Jan. 12, 2003, 09:42:16 AM EST
         Check the mounting holes on the MB - (folkert) - (33) - Jan. 12, 2003, 10:03:48 AM EST
             Re: Check the mounting holes on the MB - (cwbrenn) - (32) - Jan. 12, 2003, 10:46:53 AM EST
                 It could be the Current Draw with the BAD - (folkert) - (31) - Jan. 12, 2003, 11:05:32 AM EST
                     Hehehe, glad you like it - (cwbrenn) - Jan. 12, 2003, 11:28:08 AM EST
                     Yeah, try a BIOS upgrade. - (static) - (29) - Jan. 12, 2003, 09:50:18 PM EST
                         Well, I tried updating the BIOS - (cwbrenn) - (28) - Jan. 12, 2003, 11:03:30 PM EST
                             Updating the BIOS doesn't seem to work. - (cwbrenn) - (27) - Jan. 12, 2003, 11:57:28 PM EST
                                 Try resetting the CMOS - (orion) - Jan. 13, 2003, 12:53:21 AM EST
                                 That it's now reporting the CPU correctly is actually good. - (static) - (25) - Jan. 13, 2003, 01:01:22 AM EST
                                     Or check the CPU fan - (orion) - (1) - Jan. 13, 2003, 02:16:12 AM EST
                                         Well, the CPU fan/heat sink - (cwbrenn) - Jan. 13, 2003, 09:25:54 AM EST
                                     But if it were a bad driver for one of the peripherals, - (cwbrenn) - (22) - Jan. 13, 2003, 09:24:44 AM EST
                                         Not particularly... - (folkert) - (21) - Jan. 13, 2003, 09:42:02 AM EST
                                             OK, the specs. - (cwbrenn) - (20) - Jan. 13, 2003, 10:48:04 AM EST
                                                 Good... now onto... - (folkert) - (2) - Jan. 13, 2003, 12:25:53 PM EST
                                                     ok, but... what is KNOPPIX? - (cwbrenn) - (1) - Jan. 13, 2003, 12:46:10 PM EST
                                                         Well... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Chris READ!!!!! - (folkert) - Jan. 13, 2003, 09:12:40 PM EST
                                                 Windows XP hardware registration ... ick. - (static) - (16) - Jan. 13, 2003, 06:26:01 PM EST
                                                     More information - (cwbrenn) - (15) - Jan. 14, 2003, 08:04:16 AM EST
                                                         Ouchy.... - (folkert) - (13) - Jan. 14, 2003, 08:46:40 AM EST
                                                             of cards and coolers... - (cwbrenn) - (12) - Jan. 14, 2003, 09:24:02 AM EST
                                                                 Review the placement of each card - (Steven A S) - Jan. 14, 2003, 09:42:33 AM EST
                                                                 On cooling... - (folkert) - (10) - Jan. 14, 2003, 11:51:44 AM EST
                                                                     Re: On cooling... - (deSitter) - (9) - Jan. 14, 2003, 11:57:37 AM EST
                                                                         I use airflow dynamics... - (folkert) - (3) - Jan. 14, 2003, 12:47:19 PM EST
                                                                             "Airflow dynamics?" - (cwbrenn) - (2) - Jan. 14, 2003, 03:10:46 PM EST
                                                                                 Uhhh.... *SHRUG* - (folkert) - (1) - Jan. 14, 2003, 03:54:06 PM EST
                                                                                     I can't help it - (cwbrenn) - Jan. 14, 2003, 04:23:31 PM EST
                                                                         Add a component and it does work - (Silverlock) - (4) - Jan. 14, 2003, 04:31:59 PM EST
                                                                             Ugh :) - (deSitter) - (3) - Jan. 14, 2003, 04:37:34 PM EST
                                                                                 Huh? - (Silverlock) - (2) - Jan. 14, 2003, 04:45:45 PM EST
                                                                                     LMAO! - (inthane-chan) - Jan. 14, 2003, 04:57:24 PM EST
                                                                                     Re: Huh? - (deSitter) - Jan. 14, 2003, 05:10:03 PM EST
                                                         Check the IRQ->slot list in the m/b manual. - (static) - Jan. 14, 2003, 07:25:31 PM EST
         Chris, I did not see mention of thermal compound. - (a6l6e6x) - (1) - Jan. 12, 2003, 11:48:19 AM EST
             Yeah, using Silver thermal compound - (cwbrenn) - Jan. 12, 2003, 03:01:11 PM EST
         Timing issue? - (deSitter) - (2) - Jan. 12, 2003, 01:07:27 PM EST
             I think so. - (cwbrenn) - (1) - Jan. 12, 2003, 03:04:43 PM EST
                 Oh yes - (deSitter) - Jan. 12, 2003, 04:01:29 PM EST
         Re: Having the darndest time trying to troubleshoot this pro - (JayMehaffey) - (9) - Jan. 12, 2003, 02:43:50 PM EST
             Re: Having the darndest time trying to troubleshoot this pro - (cwbrenn) - (8) - Jan. 12, 2003, 03:02:55 PM EST
                 They're different generation, so different T not unusual. - (Another Scott) - Jan. 12, 2003, 03:41:11 PM EST
                 Odd - (JayMehaffey) - (6) - Jan. 12, 2003, 03:49:17 PM EST
                     That's *very* hot. - (Another Scott) - (4) - Jan. 12, 2003, 04:06:34 PM EST
                         I'm very sure. - (cwbrenn) - (2) - Jan. 12, 2003, 04:18:28 PM EST
                             Oh, nevermind. You were talking to Jay. :D - (cwbrenn) - Jan. 12, 2003, 04:19:45 PM EST
                             Nothing to see. Move along. :-) -NT - (Another Scott) - Jan. 12, 2003, 04:21:40 PM EST
                         That is what it says - (JayMehaffey) - Jan. 12, 2003, 05:50:23 PM EST
                     AHHH... YIKES... - (folkert) - Jan. 12, 2003, 04:31:32 PM EST

Last minute panic is my Muse.
145 ms