IWETHEY v. 0.3.0
|
TODO
1,095 registered users | 0
active users
| 0 LpH |
Statistics
Login
|
Create New User
Welcome to IWETHEY!
IWETHEY Home
/
IWETHEY Board
/
General Q&A Forum
/
Pssst. Dot! You gettin' this down?
Post #217,842
by
Another Scott
8/6/05 11:29:56 AM
Reply
Pssst. Dot! You gettin' this down?
5/8 inch square differential fill plug
- (
boxley
)
- (50)
- July 24, 2005, 09:58:41 PM EDT
Most times that stuff doesn't need to be changed.
- (
Another Scott
)
- (31)
- July 24, 2005, 10:55:17 PM EDT
I REFUSE!!! to pay to remove one bolt where I can reach it
- (
boxley
)
- (30)
- July 24, 2005, 11:13:34 PM EDT
Update?
-NT
- (
Another Scott
)
- (29)
- Aug. 4, 2005, 11:12:04 AM EDT
PB blaster, crowfoot 5/8ths wrench and a breaker bar
- (
boxley
)
- (28)
- Aug. 4, 2005, 12:51:04 PM EDT
Good. Just the thing for you, here. 36 kB .img
- (
Another Scott
)
- (27)
- Aug. 4, 2005, 01:12:26 PM EDT
I like these better
- (
boxley
)
- (26)
- Aug. 4, 2005, 01:29:09 PM EDT
Neat! Would be, um, challenging in the snow though. :-)
-NT
- (
Another Scott
)
- (1)
- Aug. 4, 2005, 01:34:06 PM EDT
hey I live in Atlanta, stay home both snow days
-NT
- (
boxley
)
- Aug. 4, 2005, 01:56:08 PM EDT
Sparrows
- (
tuberculosis
)
- (2)
- Aug. 4, 2005, 04:45:38 PM EDT
only one hr before a 6hr recharge? feh
-NT
- (
boxley
)
- (1)
- Aug. 4, 2005, 05:42:30 PM EDT
2-3 hrs at 220 V.
- (
Another Scott
)
- Aug. 4, 2005, 05:48:49 PM EDT
My cousin's got
- (
imric
)
- (20)
- Aug. 4, 2005, 04:59:32 PM EDT
That site is nuts! "700 HP from Suzuki Hyabusa"! =)
-NT
- (
Another Scott
)
- (16)
- Aug. 4, 2005, 05:03:08 PM EDT
You made me look
- (
imric
)
- (1)
- Aug. 4, 2005, 07:49:15 PM EDT
Yeah, but it's nuts!
- (
Another Scott
)
- Aug. 4, 2005, 08:20:15 PM EDT
Based on limited reading
- (
broomberg
)
- (13)
- Aug. 4, 2005, 08:30:57 PM EDT
I have a friend with a 700hp pickup
- (
boxley
)
- Aug. 4, 2005, 09:04:39 PM EDT
A couple numbers for comparo
- (
Ashton
)
- (8)
- Aug. 4, 2005, 09:07:42 PM EDT
Wadaymean "plebes", you effete SF Eurowimp . . .
- (
Andrew Grygus
)
- (7)
- Aug. 5, 2005, 01:51:37 AM EDT
Waal now, Mr. Cash n'carry on -
- (
Ashton
)
- (6)
- Aug. 5, 2005, 06:30:12 AM EDT
Don't know nothin about Harleys . .
- (
Andrew Grygus
)
- (5)
- Aug. 5, 2005, 09:05:01 AM EDT
Oooh - envy; that'd be when I had a mere 500 cc Matchless..
-NT
- (
Ashton
)
- (4)
- Aug. 5, 2005, 05:44:16 PM EDT
well I might settle, afford one of these
- (
boxley
)
- (3)
- Aug. 5, 2005, 06:01:56 PM EDT
Heh - a 00's *Whizzer* !
- (
Ashton
)
- (2)
- Aug. 5, 2005, 09:59:33 PM EDT
difference between a small motor and a bicycle
- (
boxley
)
- (1)
- Aug. 6, 2005, 12:10:10 AM EDT
Pssst. Dot! You gettin' this down?
-NT
- (
Another Scott
)
- Aug. 6, 2005, 11:29:56 AM EDT
Short answer: He'll get to Heaven before you.
- (
Another Scott
)
- (2)
- Aug. 4, 2005, 09:08:33 PM EDT
No way they can use it
- (
drewk
)
- Aug. 5, 2005, 12:38:30 AM EDT
the old 911 was a pedal car, might as well drive a vw bug
-NT
- (
boxley
)
- Aug. 5, 2005, 08:32:27 AM EDT
OT when did everyone switch from chains to belts and why?
-NT
- (
boxley
)
- (2)
- Aug. 4, 2005, 09:05:14 PM EDT
Re: OT when did everyone switch from chains to belts and why
- (
Ashton
)
- (1)
- Aug. 4, 2005, 09:19:57 PM EDT
I think he's asking about motorcycle drive belts. ;-)
- (
Another Scott
)
- Aug. 4, 2005, 09:25:45 PM EDT
Lightly...
- (
folkert
)
- July 24, 2005, 11:20:51 PM EDT
Penetrating oil, proper socket, and air impact wrench.,
- (
Steve Lowe
)
- (2)
- July 24, 2005, 11:49:17 PM EDT
Impacts are over-rated. :-/ #196868.
-NT
- (
Another Scott
)
- (1)
- July 25, 2005, 12:03:19 AM EDT
But... the new ones...
- (
folkert
)
- July 25, 2005, 06:06:48 AM EDT
Back in my day, we used to weld a piece of pipe onto them.
-NT
- (
CRConrad
)
- (13)
- Aug. 5, 2005, 05:57:23 AM EDT
you didnt have wrenches?
-NT
- (
boxley
)
- (12)
- Aug. 5, 2005, 08:34:52 AM EDT
That was your problem, wasn't it?
- (
CRConrad
)
- (11)
- Aug. 6, 2005, 06:20:27 PM EDT
and your reply to weld a rod to the bolt was? :-)
-NT
- (
boxley
)
- (10)
- Aug. 6, 2005, 06:50:04 PM EDT
Huh? WTF is that question supposed to mean???
- (
CRConrad
)
- (9)
- Aug. 6, 2005, 07:18:08 PM EDT
One could read it as 'weld a pipe onto the plug' if one ...
- (
Another Scott
)
- (8)
- Aug. 6, 2005, 07:23:00 PM EDT
Uhh... Yes - that is how one *should* read it.
- (
CRConrad
)
- (7)
- Aug. 6, 2005, 07:40:11 PM EDT
Um...
- (
Another Scott
)
- (6)
- Aug. 6, 2005, 08:00:03 PM EDT
Gas tanks & welding . . .
- (
Andrew Grygus
)
- (1)
- Aug. 6, 2005, 08:33:05 PM EDT
Watched it done on aluminum diesel tanks
- (
folkert
)
- Aug. 7, 2005, 10:11:03 AM EDT
ICLRPD
- (
Steve Lowe
)
- Aug. 7, 2005, 01:10:54 AM EDT
Of course; through, not over; and of course again.
- (
CRConrad
)
- (2)
- Aug. 7, 2005, 05:20:39 PM EDT
You're a better man than I am, Gunga Din.
-NT
- (
Another Scott
)
- (1)
- Aug. 7, 2005, 05:38:38 PM EDT
Naah... You're welding facing *away from* the tank.
-NT
- (
CRConrad
)
- Aug. 7, 2005, 05:49:17 PM EDT
i
we
they
.org
Houston, we have positive capillary pressure.
84 ms