IWETHEY v. 0.3.0 | TODO
1,095 registered users | 0 active users | 0 LpH | Statistics
Login | Create New User
IWETHEY Banner

Welcome to IWETHEY!

New Re: I need a new amp
In interest of KISS -

What your doppelganger said, re the physics and all. Probably your Kenwood could be repaired, though dunno what sorts of shops (or shoppes) abound in your area. ie May be cheaper to just replace the Kw with something else, especially if it's a hassle to find somebody local who can still troubleshoot and also use a soldering iron.

If you want a simple amp (usually still + preamp - perhaps even hi-gain, as for moving-coil phono cartridges) another No-nonsense usually good-buy brand is NAD, and you don't need to take the persimmon peeler.

While there hasn't been a 'need' for 15" woofers in at least a couple decades, given discoveries about passive radiators, long-throw voice coils, etc. - at least your system is probably (electrically) efficient == you don't need many watts/channel. If you Like its sound through the years -?- no need to embark on a mind-meld into latest gizmoes.

Best argument for the persimmon-peeler assemblies is - the remote - whether for mute or just volume change.. but my brain hurts when contemplating all the multi-channel Tee Vee special effects gadgetry (and maybe yours does too). Thing is - it's Great for feeling the Mother Ship overhead, as the belly-hatch opens and the US Capitol is met with its anti-matter exact equivalent {sustained Woo/Yays from relieved populace} -

But for stereo playback of music - well, an NAD should sound Just Fine. (There's a plethora of other Designer brands, current with which I am not; but it's a jungle of TLAs and hype out there - even about a simple amplifier :(

(And any discussion of fidelity Old, New and Doublespeak-Marketing.. gets into stuff more arcane than [link|http://z.iwethey.org/forums/render/content/show?contentid=194882| this :-\ufffd].)


Luck,

moi


PS - for Admin, I'd ponder the trans-shipping, etc. re repair. :-)
Fact is though, I no longer have distortion meters and paraphernalia for decent audio *checking, would likely have to run down O-Scott's handy link to a Sam's and then .. wait for parts. (Caps is always a good bet, but hardly a diagnosis).

*fixing overt symptoms is one thing and sometimes it's enough. But it isn't 'fixed' until it meets certain specs. I Hate sloppy.. Etc. Now were it an FM tuner, I just happen to have a pristine Sound Technology 1000A - which is what Marantz used in designing the legendary "Model 10B" (as still garners $2-3K on eBay). That would vet any FM tuner extant. It's a different world now: that of the disposable..
Expand Edited by Ashton Feb. 19, 2005, 06:15:36 AM EST
New Remember the thinger lost in transit???
--
[link|mailto:greg@gregfolkert.net|greg],
[link|http://www.iwethey.org/ed_curry|REMEMBER ED CURRY!] @ iwethey

[link|http://it.slashdot.org/comments.pl?sid=134485&cid=11233230|"Microsoft Security" is an even better oxymoron than "Miltary Intelligence"]
No matter how much Microsoft supporters whine about how Linux and other operating systems have just as many bugs as their operating systems do, the bottom line is that the serious, gut-wrenching problems happen on Windows, not on Linux, not on Mac OS. -- [link|http://www.eweek.com/article2/0,1759,1622086,00.asp|source]
New Re: I need a new amp
The new amp will be more for the TV/DVD/PVR than for stereo playback, excepting the Squeezebox.

Would bad caps cause intermittent buzzing and cut-outs? If I tap the amp or fiddle the RCA plugs on the back I can sometimes get the sound to come back. Walking in front of it does that as well (or is just as likely to send it south instead).

The system has a remote (Kenwood's brand-new-at-the-time synchro system) so that's not a driving force. Size, 5-1, and the faults are.

Thanks.
Regards,

-scott anderson

"Welcome to Rivendell, Mr. Anderson..."
New That sounds like bad connections somewhere. 118 kB .img
My father had an 1970s-ish RCA 25" TV that was blown up by lightning a couple of times. He managed to fix it each time and it remained a pretty good set. The fact that he couldn't hear the flyback tranformer whine any more let him think it was ok too. ;-) He told me what finally did it in was the quality of the soldering in it - there were eventually too many bad connections for him to fix. It was over 20 years old by that point.

Modern soldering of circuit boards is automated and is usually pretty good so that is probably not the problem with your stuff.

It used to be that my wife's Dual turntable would only work on both channels if she banged the tonearm just the right way. I eventually found a replacement cartridge for it and the problem went away.

Your description is classic signs of bad connections somewhere. I think that bad capacitors usually have different symptoms (e.g. in my 30" Toshiba with some bad caps the vertical size of the image is way off.). Caps fail by internal failure (short circuits or open circuits), leakage of the electrolyte, swelling, or bad external contacts. It's something that might be worth a visual inspection (after checking the stuff below). But my guess is you've got a bad contact somewhere - most likely the cables or where the cables attach.

Buzzing is often a bad ground connection.

Check the cables from the amp, the interal connections to the output conectors, and the speakers. Simple things like that - you might be surprised. Have you tried using a different set of speakers? You need to figure out if it's the electronics or the wiring or the speakers.

If size of the electronics is a big issue, I think there are remote remotes that let you control things in a different room. Maybe you can put your electronics in a closet and just have a remote sensor wired to it. Then get your 15.1 CyberSurroundMegalopolisCompanderExplosion box wired into your existing amplifier, etc. (Of course, it's probably easier to find a new all-in-one than to find just a Dolby x.y decoder box.) You'd still have to figure out what to do with your speakers. Maybe build a coffee table around them or something....

Or you could throw caution to the wind and just get [link|http://www.crutchfield.com/S-HY7ZuCKahb0/cgi-bin/ProdView.asp?g=10420&I=033AV5805B|this ] contraption. After you win the lottery. You'll probably need to reinforce your floor first. Here's the back view:

[image|http://akamaipix.crutchfield.com/products/2004/033/h033AV5805B-b.jpeg|0|Denon AVR-5805 back|194|300]

:-)

Luck. HTH.

Cheers,
Scott.
(Who hates to see good equipment replaced before its time.)
New Re: That sounds like bad connections somewhere. 118 kB .img
The cables are all tight. If the connection is bad it's inside the case. I've checked the speaker wires several times as well.

Thanks.
Regards,

-scott anderson

"Welcome to Rivendell, Mr. Anderson..."
New Those sockets do die.
Though it's usually from constant use, not constant connection.

2c deposited.

Wade.

Is it enough to love
Is it enough to breathe
Somebody rip my heart out
And leave me here to bleed
 
Is it enough to die
Somebody save my life
I'd rather be Anything but Ordinary
Please

-- "Anything but Ordinary" by Avril Lavigne.

New Yawn.. I have one of those in my car.
These toys are beginning to resemble a patch panel at the Bevatron - but with Gold-plated connectors. And $500 Or-more Speaker Cables [I'm not making that up, either.]

(I wonder who/what/where such a $Six Thousand box might be 'repaired'?)

As to the buzz - agreed, likely a missing ground - or 'added' ground loop!
"Walking in front of it" -- shades of RIAA phono inputs, and even, the plug in the wall at 'wrong' polarity. Bad PS filter caps == 120 Hz hum (not 60.. except with vacuum tube filaments). But a bad cap in other circuits: conceivably a buzz, I guess.

Offhand, I think a hardware kindaguy needs to assess this; doesn't usually translate well into a flow chart. Hell, it could even be some lo level amp picking up Tee Vee sync buzz! (often the case in the old days) Too many parallel possibilities. :-/


Luck,
moi
     I need a new amp - (admin) - (20)
         Think again about getting your present gear fixed. - (Another Scott) - (2)
             good idea! Ash whats the turn around time on repairs? - (daemon)
             Two things: - (admin)
         stroll by the local flea/pawn shops first - (daemon) - (2)
             Bad idea - (drewk) - (1)
                 Agreed. -NT - (admin)
         Re: I need a new amp - (Ashton) - (6)
             Remember the thinger lost in transit??? -NT - (folkert)
             Re: I need a new amp - (admin) - (4)
                 That sounds like bad connections somewhere. 118 kB .img - (Another Scott) - (3)
                     Re: That sounds like bad connections somewhere. 118 kB .img - (admin) - (1)
                         Those sockets do die. - (static)
                     Yawn.. I have one of those in my car. - (Ashton)
         How about something like this? - (folkert) - (1)
             Thanks. -NT - (admin)
         Don't buy an all in one. - (bepatient) - (1)
             Re: Don't buy an all in one. - (admin)
         I'm rather partial to Yamaha receivers - (Steven A S) - (2)
             Looks nice, but pretty expensive. - (admin) - (1)
                 Re: Looks nice, but pretty expensive. - (Steven A S)

C:>_
48 ms