So how'd it come out?

1,095 registered users | 0 active users | 0 LpH | Statistics
Login | Create New User

Welcome to IWETHEY!

Post #33,678 by Steve Lowe 3/27/02 11:13:32 PM Reply	So how'd it come out? The critics are obviously dying to get a peek at it. :) ----- Steve
Post #33,680 by kmself 3/28/02 12:11:19 AM Reply	Waiting for the weekend Pretty slammed at work all week, I'll get another stab at it Sat/Sun, depending. `-- Karsten M. Self [link\|mailto:kmself@ix.netcom.com\|kmself@ix.netcom.com] [link\|http://kmself.home.netcom.com/\|[link\|http://kmself.home.netcom.com/\|http://kmself.home.netcom.com/]] What part of "gestalt" don't you understand? Keep software free. Oppose the CBDTPA. Kill S.2048 dead. [link\|http://www.eff.org/alerts/20020322_eff_cbdtpa_alert.html\|[link\|http://www.eff.org/alerts/20020322_eff_cbdtpa_alert.html\|http://www.eff.org/...a_alert.html]]`
Post #33,685 by Ashton 3/28/02 3:30:49 AM Reply	'Nother bit story Especially for thin, splinterable materials - as multiple thin-plies: Forstner bits ie. those with this bit shape: \|\ufffd\ufffd\ufffd\| ~_v~ with a small point and sharp outer edges, also with a narrow cutting 'vee'. Natch it's also great for blind holes, as for a peg. Dunno about 2" dia. ones, but some flat bits with this shape come in pretty large dia. - needing pretty slow speeds to swing that large radius. I'm not sure how well these compensate for the awful physical composition of particle board though (?) In normal wood these produce the cleanest holes I've seen. They are also difficult to resharpen, so best reserved for quality work. The flat ones are easier to sharpen, if you have assorted round-ish stones and some patience. Cheers, Ashton

Carpentry/Cabinetry: cutting panelling w/ hole saw? - (kmself) - (23) - March 24, 2002, 10:01:03 PM EST

High Density Particle Board and holesaws... - (folkert) - March 24, 2002, 10:11:02 PM EST

Well, I've drilled plenty of 'em - (Andrew Grygus) - (20) - March 24, 2002, 10:58:53 PM EST

Hardware - (kmself) - (19) - March 24, 2002, 11:21:00 PM EST

Well, your best bet . . - (Andrew Grygus) - (18) - March 24, 2002, 11:58:52 PM EST

Another tip: - (Steve Lowe) - (17) - March 25, 2002, 02:35:28 AM EST

Roll tape - (kmself) - (16) - March 25, 2002, 03:21:24 AM EST

Y.M, "Silence... Camera... Action!", Oscar? :-) -NT - (CRConrad) - (12) - March 25, 2002, 03:26:47 AM EST

"Most penetrating role in a particle-board feature" ... -NT - (Meerkat) - (10) - March 25, 2002, 07:51:50 PM EST

... and you thought the Oscar's were boring... -NT - (static) - March 25, 2002, 09:57:56 PM EST

...not much plot, but the storyboard held together well.... -NT - (kmself) - March 26, 2002, 12:36:59 AM EST

"..despite a rather wooden peformance, nail-biting action" -NT - (Ashton) - March 26, 2002, 01:52:57 AM EST

..."OW!" she cried, as the drill bit into her... -NT - (Yendor) - (4) - March 26, 2002, 10:18:01 AM EST

Opening line from the "IWeThey HoleSaw Masacreee"? - (bbronson) - (3) - March 26, 2002, 10:29:46 PM EST

with a sub-title 'IWeThey takes a nasty turn...' -NT - (Meerkat) - (2) - March 26, 2002, 10:58:17 PM EST

Last I saw, she was doing a bit part ... - (altmann) - (1) - March 27, 2002, 02:43:27 AM EST

I believe the novel was pulped, too... -NT - (Meerkat) - March 27, 2002, 06:25:19 PM EST

... some thought the piece a bit heavy ... -NT - (drewk) - March 26, 2002, 10:49:18 AM EST

... hammered by critics. The director had a screw loose... -NT - (admin) - March 26, 2002, 03:35:41 PM EST

The Plot splinters too much -NT - (boxley) - March 26, 2002, 05:26:31 PM EST

So how'd it come out? - (Steve Lowe) - (2) - March 27, 2002, 11:13:32 PM EST

Waiting for the weekend - (kmself) - (1) - March 28, 2002, 12:11:19 AM EST

'Nother bit story - (Ashton) - March 28, 2002, 03:30:49 AM EST

PM: Carpentry/Cabinetry: cutting panelling w/ hole saw? - (kmself) - April 8, 2002, 04:12:39 AM EDT

iwethey.org

For Wade, it is to laugh.
48 ms