Post #138,553
1/29/04 12:02:26 PM
|
Seconded.
Low-tech innovation with ordinary food items wins.
-YendorMike
[link|http://www.hope-ride.org/|http://www.hope-ride.org/]
|
Post #138,554
1/29/04 12:05:06 PM
|
However
We have no potatoes.
Is there power running to it even if the switch is off?
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,557
1/29/04 12:09:51 PM
|
Re power:
Depends on whether it was wired properly. If the switch was placed on the cold wire, the socket will still be hot.
Just wear thick gloves with the pliers.
Regards,
-scott anderson
"Welcome to Rivendell, Mr. Anderson..."
|
Post #138,566
1/29/04 12:24:27 PM
|
shut off breaker or pull fuse!
Don't want to read about you in the Darwin Awards.
----- Steve
|
Post #138,571
1/29/04 12:28:31 PM
|
On second thought...
I'm definitely leaving this for John to handle. Our breakers make no logical sense, and I don't have a clue which one is the kitchen.
I'll give him all your suggestions though, just thought I could do it myself.
Thanks for the help.
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,603
1/29/04 1:45:14 PM
|
Now we'll read about John in the Darwin Awards... ;)
|
Post #138,605
1/29/04 1:49:27 PM
|
Throw the master
BTW if you can't rotate the bulb out, chances are the solder on the center contact tip melted and it's now welded to the fixture.
Instead of twisting the bulb, try gently but firmly rocking it side to side in the socket, while pulling slightly - that may break the solder weld at the center contact.
-drl
|
Post #138,617
1/29/04 2:03:51 PM
|
Re: Throw the master
Hmmm I'll have to find that, didn't know there was a master switch.
I tried to rock it like you said, it seems to give a little, but so far, not loose. Maybe if I do it every now and then, it will eventually come loose.
Great suggestion, Ross.
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,621
1/29/04 2:08:40 PM
|
Re: Throw the master
If you can get it a little loose, then start gradually applying a twisting force to it. The point is to break the solder weld at the tip.
-drl
|
Post #138,628
1/29/04 2:16:24 PM
|
IT WORKED!!!!!!!!!!!!!
Thanks Ross! I just kept going in there and doing it every few minutes, and it finally twisted some! Then I got ahold of it and twisted it loose!!!
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,633
1/29/04 2:19:56 PM
|
So, let's see now...
How many IWETHEYers does it take to change a light bulb?
|
Post #138,639
1/29/04 2:26:18 PM
|
Re: So, let's see now...
How many IWETHEYers does it take to change a light bulb? One Owl and one really smart IWETHEYER to tell her what to do! ;) Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,642
1/29/04 2:26:34 PM
|
You guessed....ICLRPD (new thread)
Created as new thread #138641 titled [link|/forums/render/content/show?contentid=138641|You guessed....ICLRPD]
----- Steve
|
Post #138,648
1/29/04 2:44:38 PM
|
Depends whether the lightbulb is in St. Louis
"good ideas and bad code build communities, the other three combinations do not" - [link|http://archives.real-time.com/pipermail/cocoon-devel/2000-October/003023.html|Stefano Mazzocchi]
|
Post #138,655
1/29/04 3:00:37 PM
|
zzzzzzzzzzzzzing!
----- Steve
|
Post #138,668
1/29/04 3:20:44 PM
|
Re: zzzzzzzzzzzzzing!
Much better to have zzzzzzzzzzzzzzzzzzzing! than
zzzzzzzzzzzzzzappppppppppppppppppppp!!!!! ;)
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,671
1/29/04 3:27:57 PM
|
No doubt.
----- Steve
|
Post #138,672
1/29/04 3:34:36 PM
|
Bird in the bug zapper
===
Implicitly condoning stupidity since 2001.
|
Post #138,763
1/30/04 4:18:11 AM
|
13 Points - for good recovery!
|
Post #138,636
1/29/04 2:22:17 PM
|
Re: IT WORKED!!!!!!!!!!!!!
Lesson - use the next lower wattage bulb.
-drl
|
Post #138,638
1/29/04 2:24:59 PM
|
Replacing all the sockets
My brother is gonna help us switch out the sockets in the kitchen soon, with better ones that don't bend and twist up.
But thanks for the tip!
Nightowl >8#
"To become different from what we are, we must have some awareness of what we are." Eric Hoffer
|
Post #138,765
1/30/04 4:27:04 AM
|
Just make damn sure the "new" ones
aren't *aluminum* (threaded part.. they wouldn't dare use it on the center conductor) Wait; yes, they Would. ie Look at the suckers before purchase.
Tip: run a candle across each new bulb (threaded base) before screwing it in. Seat it, back off and reseat - snug but not "as tight as you can get it before you twist off the wires inside". Prevents seizing.
Usually.
|