That wasn't necessary in my case.

Post #220,933 by Andrew Grygus 8/25/05 2:26:59 PM Reply	That wasn't necessary in my case. With the VIA KT400 (vs. KT600) motherboard the Sarge install recgnized the controller and installed just fine. There are some custom boot CDs out on the Internet to fix RAID install problems but I think they're mostly for Woody. [link\|http://www.aaxnet.com\|AAx]
Post #220,934 by inthane-chan 8/25/05 2:29:19 PM Reply	So I'd have to build my own boot image CD. SUSE, here I come. :P apt-get install godlike-powers
Post #220,935 by Andrew Grygus 8/25/05 2:32:23 PM Reply	Problem is . . . . . since (presuming your install is up-to-date) the installer didn't recognize the controller, I'm not sure you could make a boot image that worked because the megaraid driver is already included. Unless, of coourse, you found a driver specific to the HP controller. [link\|http://www.aaxnet.com\|AAx]
Post #220,944 by Andrew Grygus 8/25/05 2:46:13 PM Reply	Also problem is . . . . . I see posts out on the Internet saying they're having HP NetRAID-3Si problems with Suse also. Didn't look into it in depth, but you should check them out. [link\|http://www.aaxnet.com\|AAx]

Welcome to IWETHEY!