Bill,
Just an update for the posting (this is a reported work around but is still
not a permanent fix). The others I have been corresponding with just
responded to my last posting and reported that when they added a FAT32 disk
(my suggestion along with under clocking) and used that, their problem
disappeared! It IS NTFS causing the headache!!!! Still don't know how to fix
my problem as I have nearly 200 Gig disk space all NTFS (you can't switch
back) and it's 2/3rds full (ouch). Once again I have been shafted by the
Mother F#%*$&% at Microsoft!!!


FIRST RESPONSE
That we are dealing with another Memory problem.

First off, does he have Terminators in the open Memory slots?
Yes there are "terminators" though they are called bridges with "RDRAM".

Second if not, does he have 4 128MB pieces of memory from the same
Manufacturer and Class of memory.
There are two 256 Meg sticks and they are, of course, the same manufacture.

Third, change the ordering of the Memory. You be amazed how it'll help
finger the bad one... or even solve the problem.
Tried that, been there done that.

Fourth, if it turns out the Memory is not the problem, look at the Winders
drivers for the "High Speed" IDE interfaces. Years ago we started running
into problems with Windows 3.1 when the drives started to get to big and
fast for it. Sometimes it'd just sit there thrashing. You had to end up
enabling some setting... gosh can't remember what it was.

The IDE is an "on board chip set" and I have the drivers loaded that came
from the MB manufacturer.

Fifth, Are we at SP3 or better on this machine?

Yes SP3 is loaded

Sixth... we might still be seeing the Klez on this machine.
"Klez"??????

SECOND RESPONSE
You need the INF files that describe the motherboard particulars to Windows
- otherwise it loads "generic" interfaces that know nothing of the
particular advantages of this or that chipset.

These were loaded from the manufacturers CD.

This is commonplace on laptops.

For example:

Install Windows 2000
Unpack INF files
Restart Windows 2000
What it finds, it finds.
What it doesn't, you install manually.
No comment here...

Windows is really quite beautiful in its handling of hardware - no doubt
because the manufacturers shower Redmond with information.
I will have to totally disagree with this statement. Windows sucks when it
comes to handling hardware!